Loading Paper - Citizen CT-S651II Manual De Usuario

3.1 1

Loading Paper

1. Turn on the power.
2. Press up on the cover open butto n to open the paper cover.
3. Load the pap er roll so that the printabl e side of the pape r is facing up, as shown by
arrow A.
4. Pull a few cm of pap er straigh t out in the directio n of arrow B.
5. Close the paper cover until you hear a click. Paper is fed and cut automatica lly (by
the factory setting).
CAUTION
 Always use the specified types of paper rolls.
 Confirm that the paper roll is set correctly.
 If the paper is skewed and not coming straight out of the paper cover, open it and
straighten the paper.
 Always pull a few cm of paper straight out of the printer if you open the paper cover
while paper is loaded.
 Press on the center of the paper cover to close it securely.
 Be careful of paper cuts while loading the paper.
 Do not touch the print head, manual cutter, or auto cutter while the paper cover is
open. Doing so may cause a burn or cut.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Refer to 5.3 Manual Setting of Memory Switches
— 36 —
V10 CONSUMIBLES S.L.