Citizen CT-S651II Manual De Usuario página 56

5. Press the FEED button for at least two seconds.
A setting for the memory switch is printed, through the cycle, each time the FEED
button is pressed for at least two seconds.
Press the FEED button for at least two seconds to cycle through the list until the
function of the memory switch you want to change is printed.
6. Press the FEED button.
A setting is printed each time the FEED button is pressed in order through the cycle.
When the current settings are printed, the ERROR LED lights.
Press the FEED button until the setting you want is printed.
7. Press the FEED button for at least two seconds.
The selected settings are set.
The next memory switch function and settings are printed.
8. Repeat steps 5 to 7 to change different function s for the current memory switch
numb er.
9. Open the paper cover and close it.
The changed memory switch settings are printed.
10. Repeat steps 4 to 9 to change functio ns for a different memory switch number.
11. Press the FEED button until "Save To Memory" is prin ted.
12. Press the FEED button for at least two seconds.
The changed memory switch settings are saved and a list of them is printed.
The printer exits individual setting mode when printing is finished.
Memo ry switch initializatio n
Set all the memory switches to the factory settings.
1. Do steps 1 throu gh 3 of the pro cedure to enter ind ividu al settin g mode.
2. Press the FEED button until "Save To Memory" is prin ted.
3. Open the paper cover.
4. Press the FEED button for at least two seconds.
All memory switches change to the factory settings.
5. Close the pap er cover.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Memory switch function
V10 CONSUMIBLES S.L.
Current setting
— 52 —