Self Test - Citizen CT-S651II Manual De Usuario

4.4 Self test

While paper is loaded, press and hold the FEED button while turning the power
on. Hold the FEED button down for about one second and then release it to start
self test. The printer prints its model name, version, DIP switch settings,
memory switch settings, and a list of built-in fonts.
Note:
*: Printers with a USB interface do not have DIP switches, so the DIP switches all appear off on the
self test printout.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Firmware version
Interface
Serial communication
status
(USB or Serial interface
models only)
Buffer size
— 43 —
V10 CONSUMIBLES S.L.
DIP switch
settings*
(USB or Serial
interface models
only)
Memory
switch
setting