J.P. SELECTA UV2005 Manual De Instrucciones página 42

MANUAL DE INSTRUCCIONES CODIGO 80243 REV A
Figure 21
Figure 23
J
.P. SELECTA s.a.
Enero /11
2-2. Coefficient Method
If you know the standard curve equation, you can use this method to test.
Move the cursor onto the Coefficient by pressing [»] and [«], and then press
[ENTER], it goes into the formula selecting screen. (Fig. 21)
Choose the formula you need by pressing "1" or "2" in the numeric keypad, you'll
enter the coefficient method pre-testing screen. (Fig.22)
You can also select by pressing [»] and [«] followed by [ENTER].
Note:
The two formulas can be converted each other. It's up to you to choose anyone of
them, but the operation will be the same.
C=KA+B is an example.
Set Wavelength
Press [GOTO] in the pre-testing screen and input the testing wavelength by pressing
the numeric keypad. (Fig.23)
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 42
Tel 34 93 770 08 77 Fax 34 93 770 23 62