Publicidad
10.
From inside the truck bed, attach pucks (2) and trim rings (4) to rails (1) using button head screw (8) and lock
washer (9) (Figure 14). Tighten to 110ft.lbs. torque.
Figure 14
11.
Insert puck plugs (2) (as shown) whenever pucks are not in use. (Figure 15)
Install REESE
Elite
12.
Make sure all 1/2" bolts are torqued to 75 ft. lbs., 5/8" bolts are torqued to 110 ft. lbs, and bed bolts are torqued
13.
to 75 ft. lbs.
14.
Re-attach ground wire.
30852IN – 16MAY17 REV. C
8
9
2
3
Series fifth wheel per hitch assembly instructions.
PCN9762
©2011, 2014 , 2017 HORIZON GLOBAL
DO NOT lubricate threads. It may cause bolt failure.
Truck Bed
4
Puck Assembly
WARNING:
Figure 15
Printed in Mexico
9
Publicidad
