Xerox Phaser 6115MFP Guía De Configuración De Funciones página 9

Windows USB Installation
Ensure all cabling has been properly connected between the product and
your computer with the product turned Off.
Note: CentreWare IS is not available over a USB connection.
1. Insert the Software and Documentation CD-ROM into your
computer's CD-ROM drive. The installer will start-up
automatically.
2. Turn the Phaser 6115MFP On.
3. There are two ways to install the drivers:
■
Windows will now auto-detect the product. Follow the on-
screen prompts to install the printer driver, scan driver, and
MFP ControlCentre software.
■
Recommended: Close the auto-detect dialog boxes and run
the Xerox installer.
4. Click the Language button and select your language from the list.
5. Select Install Drivers.
6. Select USB (Print Driver, Scanner Driver, and MFP
ControlCentre).
7. Click Agree after reading and accepting the Xerox License
Agreement.
8. Select your Phaser 6115MFP Multifunction Product from the list
of discovered printers, and then click the Install button.
9. Print a Test Page to verify the installation was successful.
Phaser® 6115MFP Multifunction Product
Step 2: Installing the Product Drivers
EN - 7