Limit Thermostats - Diamond E77/M50I7-N Manual Del Usuario

4.3

LIMIT THERMOSTATS

The pan is equipped with two "safety thermostats" (D, Fig. 4), each of them controls the correct operation of one heater. In case
one of the thermostats should be inactivated, remove the relevant cap onto the dashboard and push in order to resume the
operation ; if it should be inactivated once again, ask for the intervention of a "Servicing Centre".
A = Electric heaters control handle
D = Safety thermostat
E = Water dispenser
I = Hot water dispensing handle
L = Safety valve with pressure gauge
O = Cold water dispensing handle
P = Interspace loading tap
Q = Interspace level tap
R = Drain siphon-shaped device
S = Pan water drain tap
T = Hot water inlet pipe
U = Cold water inlet pipe
Z = Interspace thermometer
= Supply cable entry
= Equipotential
- 18 - - 18 - - 18 - - 18 - - 18 -
Fig. 4