Troubleshooting - Silvercrest SPBH 5.200 A1 Manual De Instrucciones

SilverCrest SPBH 5.200 A1

Troubleshooting

The power bank is not charging.
 Faulty connection, double-check the connection.
 The USB power adapter you are using is defective. Use a
different power adapter that you are certain is working.
 Check whether the used power socket is alive.
 The Mode LED (4) lights red. The allowed operating
temperature has been exceeded. Unplug all connected
cables, wait for the power bank to cool down and restart the
charging process.
A connected device is not charging.
 The battery of your power bank is empty; recharge it.
 No connection to the external device, double-check the
connection.
 Press the Mode selection pushbutton (1) briefly to start the
charging process.
 Instead of the supplied USB charging cable (B), try the
original charging cable of the device you want to charge.
 The current consumption of the connected device is too low
(< approx. 100 mA). It is not possible to charge it with the
power bank. Please check the technical specifications of the
connected device.
Hand warming function: no heating.
 The battery of your power bank is empty; recharge it.
34 - English