Troubleshooting; Cleaning And Maintenance - Silvercrest HG01041A Instrucciones De Montaje, De Uso Y De Seguridad

Repeat this process until you have selected your desired audible signal.
The last-selected audible signal is automatically stored.

Troubleshooting

After the influence of extraordinary environmental conditions (e.g. a strong
electromagnetical field) the function of the item may be affected. In this
case, please take off the batteries of the transmitter and the receiver for
approximately 2 minutes. Then proceed again as described in the section
"Synchronising the transmitter / receiver".
Electrostatic discharges may lead to malfunctions. If such malfunctions
do occur, remove the battery for a short time and then replace it again.
Then proceed again as described in the section "Synchronising the
transmitter / receiver".

Cleaning and maintenance

Under no circumstances should you use liquids or detergents, as
these will damage the product.
The product should only be cleaned on the outside with a soft dry cloth.
GB/IE 29