Ford Explorer 2007 Manual Del Usuario página 530

Driver Controls
To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
following:
1. Enter SYSTEM CHECK to display
"OIL XXX% OIL LIFE OK".
2. Press RESET control to display
"HOLD RESET IF NEW OIL".
3. Press and hold the RESET
control for more than 2 seconds. Oil
life is set to 100% and "OIL
CHANGE SET TO 100%" is
displayed.
Note: To change oil life 100% miles
value from 5,000 miles (8,000 km)
or 180 days to another value, refer
to the Oil Life Start Value selected from the SETUP MENU in this
section.
Units (English/Metric)
1. Select this function from the
SETUP MENU for the current units
to be displayed.
2. Press the RESET control to
change from English to Metric.
3. Press the RESET control for the
next SETUP MENU item or wait for
more than 4 seconds to return to
the INFO menu.
124
2007 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)