Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
5 TECHNICAL CHARACTERISTICS
Clamp jaw opening
Flexible coil
Display
Continuity check
Diode test
Low battery indication
Over-range indication
Measurement rate
PEAK
INRUSH
Temperature sensor
Input Impedance
AC response
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Battery
Auto power OFF
Dimensions
Safety
48 mm approx.
φ
140 x 180 mm
3-6/7 digits (6000 counts) backlight LCD
Threshold 50 Ω; Test current < 0,35 mA
Test current of 1,5 mA typical;
Open circuit voltage < 3 V CC typical
is displayed
"OL" is displayed
3 readings per second, nominal
Capture peaks> 1 ms
100 ms
Type thermal probe K
10 MΩ (VDC and VCA)
True RMS (AAC and VAC)
5 °C to 40 °C
-20 °C to 60 °C
Max. 80 % up to 31 ºC decreasing linearly to 50 % at 40 ºC
(104 ºF)
< 80 %
7000ft (2000 meters) maximum
One (1) 9 V Battery
After approx. 30 minutes
230 x 76 x 40 mm
For indoor use and in accordance with the requirements for
double insulation to IEC 1010-1(2001): EN 61010-1(2001).
Category III 1000 V y IV 600 V.
Pollution degree 2.
KPA-01T
CLAMP METER TRMS
32 / 50
Publicidad
Tabla de contenido
