jbc AP 1300 Manual Del Usuario página 2

ENGLISH
We appreciate the confidence you have placed in JBC in purchasing this solder feed
iron. It is manufactured to the most strictest quality standards in order to give you
the best possible service. Before using this equipment, we recommend you read
these instructions carefully.
The AP 1300 solder feed iron Ref.1300000
provides a 'third hand' in soldering by providing
solder from 0.8 to 1.0 mm. Solder is fed manually
by pulling the trigger with the index finger.
Especially advantageous in high volume
soldering and wherever an extra hand is
needed.
The AP 1300 solder feed iron can be connected
to any JBC soldering station, except for the
JT 7750 and TE 5400.
The AP 1300 solder feed iron is
connected to a station in the following
way:
The cable connection of the soldering
iron is connected to the plug in the AP
8130 stand and the cable connection
of the soldering iron stand can be
connected to any of the tool
connectors at the back of the station.
Cartridges for the
AP 1300 solder
feed iron
AP 1300
Solder feed iron
Ref. 1300000
The AP 1300 includes the following:
- AP 1300 solder feed iron.
- 1300-403 cartridge
- Allen key ref. 0780469 (for the change of the
cartridge).
- Solder reel (Sn/Pb)
- Instructions manual.
This product should not be thrown in the
garbage.
For the AP 1300 solder feed iron to work
properly, the following components are
required:
- Control unit.
- AP 1300 solder feed iron ref. 1300000.
Power: 50W.
- AP 8130 stand ref. 0788130.
All these products are supplied separately.
AP 8130 Stand
Ref. 0788130
1
Ref. 1300403
Ref. 0552315
Control unit
Tool connections