jbc AP 1300 Manual Del Usuario página 4

ENGLISH
All the cartridges shown are actual size.
JBC series cartridge
The cartridge is made of the heating element which
has the heating system, a temperature sensor and
a long life tip.
The long-life tip is basically made of:
1 Copper
2 Iron
3 Chromium
4 Tin plate
Long-life tip care
Except for the copper core, the rest of metals are
placed galvanically on relatively thin layers,
therefore it is necessary to avoid anything which
could cause their destruction.
To clean the tips, use the sponge included with
the stand and check that it is slightly moisted.
1300
CARTRIDGE RANGE
1300-401
* * * * *
1300-402
1300-403
1300-409 * * * * *
1300-410 * * * * *
3,2x1,5
Only deionised water (car battery water) should Only deionised water (car battery water) should Only deionised water (car battery water) should Only deionised water (car battery water) should Only deionised water (car battery water) should
be used in order to wet the sponge. If normal be used in order to wet the sponge be used in order to wet the sponge
be used in order to wet the sponge be used in order to wet the sponge
water was to be used, it is very likely that the tip
will become dirty due to the salts dissolved within
the water.
To re-tin the soldering tips, we recommend
using the TT 9400 tip tinner/cleaner ref. 9400000.
Solder reel types:
- Solder reel with ø1mm solder wire. Alloy:
- Solder reel with ø1mm solder wire. Alloy:
3
2,9
3,9
60%Sn / 40%Pb (with lead). 50gr. White
solder reel. Ref. 0552315.
96,5%Sn / 3,5%Ag (lead free). 50gr. Green
solder reel. Ref. 0002119.
* * * * *
1300-416
* * * * *
1300-417
1300-406
1300-404
* * * * *
1300-405
1300-418 * * * * *
* * * * * Long cartridges