Self Test; Factory Service; Safety And Warnings - NESTLE SelectFlo COMPAT 9522041 Instrucciones De Operación

13
The major functions of the pump
may be tested by the following steps:
1. Turn the pump on by pressing the
2.
3. After 4 seconds, an audible alarm
In the event a pump requires
servicing, contact your Nestlé
HealthCare Nutrition Sales
Representative or call Customer
NOT FOR PARENTERAL USE
INTENDED EXCLUSIVELY FOR
ENTERAL TUBE FEEDING
FORMULAS.
Do not use this device near
flammable anesthetics, it is a
ON key.
. . . .
8 8 8 8 will be displayed immedi-
ately. While this is displayed,
press and simultaneously hold
the p and q keys for 4 seconds.
will sound, and the screen will
display 'teSt' momentarily, and
. . . .
then all eights ( 8 8 8 8).

Factory Service

Safety and Warnings

Self Test

4. The pump rotor should begin to
turn. To test the visual alarms,
press either CLEAR, p, q, FILL,
VOL DEL, or START/STOP.
When any of these keys are
pressed or the sensor is momen-
tarily blocked, all visual alarm
indicators should light, an audi-
ble alarm will sound, and the
rotor will halt momentarily.
Service for instructions from any-
where in the U.S. and Canada at
1-877-338-4238. All service work
should be performed by authorized
possible explosion hazard.
This device is designed to minimize
the effects of uncontrolled electro-
magnetic interference and other
types of interference from external
sources. Avoid use of other equip-
ment that may cause erratic opera-
tion or degradation in the perfor-
5. Any failure indicates a service
check should be performed. See
the Factory Service section for
instructions on where to send
the pump.
6. Turn the pump off by pressing
the OFF key.
personnel only. Unauthorized
repairs void warranty (see section
on limited warranty).
mance of this device.
If the integrity of the external pro-
tective conductor in the installation
is in doubt, equipment shall be
operated from its internal electrical
power source.