NESTLE SelectFlo COMPAT 9522041 Instrucciones De Operación página 9

Operating Instructions (cont.)
How to Modify Pump Settings
To change the Infusion Rate
1. Press START/STOP to stop
the pump.
2. Enter a new infusion rate by
pressing p (increase) or q
(decrease) until the desired rate
is displayed.
To clear Volume Delivered
Volume Delivered is primarily
intended to monitor formula
delivered when intermittent
feedings are required.
1. Press START/STOP to stop the
pump if running.
2. Press VOL DEL until Volume
Delivered light is lit.
3. Press CLEAR.
8