Commands Description - Trevi ME 3P08 RC Manual De Instrucciones

ME 3P08 RC

COMMANDS DESCRIPTION

1. Weather symbols icons
2. External sensor temperature
3. Internal temperature / humidity
4. Clock
5. Date
6. External sensor
7. MODE button
8. UP button
9. SNOOZE / LIGHT button
10. DOWN key
11. MIN / MAX button
12. SNZ button
13. Battery compartment
WEATHER STATION POWER SUPPLY
Open the battery compartment (13) on the back of
the appliance and insert two "AAA" size batteries
observing the indicated polarities.
EXTERNAL SENSOR
Open the battery compartment on the back of
the appliance, and insert two "AAA" size batteries
observing the indicated polarities.
The external sensor is factory set on channel 1 and
automatically connects with the weather station,
push UP button to change channel.
TIME DISPLAY BY RADIO CONTROL
This device is equipped with a receiver capable
of receiving the time signal of the Physikalisch
Technische Bundesanstalt Braunschweig (central
Germany) receivable within a radius of 1500Km.
At the first power-up, after 3 minutes, the weather
station will start searching for the control signal
(flashing control signal icon).
- While searching for the control signal, keep the
DOWN key (10) pressed for a few seconds to
deactivate the automatic search function.
- Press the DOWN key for a few seconds to
activate the automatic control signal search
function.
Once the control signal is attached, the icon will
appear fixed.
TIME ZONE
The time is transmitted from central Germany, so
if we are in a country with a different time than
Germany, we need to set the time zone (see next
paragraph).
Not all areas of Europe may be able to receive the
radio control signal. In this case it is necessary to set
the time manually.
CLOCK MANUAL ADJUSTMENT
1. Keep the MODE button (7) pressed until the
current year to be set flashes on the display.
2. Set the year using the UP (8) or DOWN (10)
keys.
3. Press the MODE button (7), the month will
begin to flash on the display.
4. Set the month using the UP (8) or DOWN (10)
keys.
5. Press the MODE button (7), the day will begin
to flash on the display.
6. Set the day using the UP (8) or DOWN (10)
keys.
7. Press the MODE button (7), 12 / 24Hr will
start to flash on the display.
8. Set the 12 / 24H time display using the UP (8)
or DOWN (10) keys.
9. Press the MODE button (7), the time zone will
begin to flash on the display.
10. Set the time zone using the UP (8) or DOWN
(10) keys.
11. Press the MODE button (7), the time will begin
to flash on the display.
12. Set the time using the UP (8) or DOWN (10)
keys.
13. Press the MODE button (7), the minutes will
start to flash on the display.
14. Set the minutes using the UP (8) or DOWN
(10) keys.
ALARM ADJUSTMENT
1. Press the MODE button (7), the display
will show the alarm function (AL) for a few
seconds.
2. During the alarm display, long press the MODE
button (7) to adjust the time and the minutes
to which the alarm will activate and the time in
4
English