Functions Description; Technical Data - Trevi ME 3103 Manual De Instrucciones Para El Uso Y La Conexion

English

FUNCTIONS DESCRIPTION

1. Alarm symbol
2. Clock
3. Weather icons
4. Indoor humidity
5. Temperature
6. Graph of minimum and maximum temperature detected
7. Key MODE, setting the time, date and alarm
8. Key UP / AL, up key / alarm activation
9. Key DOWN / C/F, down key / change temperature °C/°F
10. Key MAX/MIN, view maximum and minimum values recorded
for temperature and humidity
11. Key SNZ / LIGHT, temporary deactivation of the alarm / turn
on backlight
12. Key RESET, reset clock, date and alarm settings, and tempe-
ratures detected
13. Battery compartment 2xAAA (not included)
POWER SUPPLY
Open the battery compartment (13) on the rear of the appliance and
insert two "AAA" size batteries respecting the polarities.
SETTING THE CLOCK
1. Press the MODE key (7) until you see the clock.
2. Press and hold the MODE key (7) to start the clock setting, the
hour will flash on the display.
3. Set the hour using the UP (8) or DOWN (9) keys.
4. Press the MODE key (7), the minutes will flash on the display.
5. Set the minutes using the UP (8) or DOWN (9) keys.
6. Press the MODE key (7) to confirm and finish the clock setting.
7. Press and hold the MODE key (8) to set the time display in
12/24 hours.
SET THE DATE
1. Press the MODE key (7) until you see the date.
2. Press and hold the MODE key (7) to start the date setting, the
year will flash on the display.
3. Set the year using the UP (8) or DOWN (9) keys.
4. Press the MODE key (7), the month will flash on the display.
5. Set the month using the UP (8) or DOWN (9) keys.
6. Press the MODE key (7), the day will flash on the display.
7. Set the day using the UP (8) or DOWN (9) keys.
8. Press the MODE key (7) to confirm and finish the date setting.
SETTING AND ACTIVATING ALARM
1. Press the MODE key (7) to access the alarm function, reco-
gnisable by the Bell symbol appears on the right of the display
(1).
2. Press and hold the MODE key (7) to start the alarm setting,
the hour will flash on the display.
3. Set the hour using the UP (8) or DOWN (9) keys.
4. Press the MODE key (7), the minutes will flash on the display.
5. Set the minutes using the UP (8) or DOWN (9) keys.
6. Press the MODE key (7) to confirm and finish the alarm setting.
7. Press the UP / AL key (8) to activate the alarm. The alarm
symbol (1) will appear on the left of the display.
8. At the setted hour the alarm will be activated. To temporarily
turn off the alarm press the SNZ / LIGHT key (11). The alarm
will reactivate automatically after 8 minutes.
9. To turn off the alarm, press the UP / AL key (8) until the demise
of the alarm symbol
WEATHER FORECASTS
The digital barometer detects changes in barometric pressure and
shows the weather forecast symbol (3). This weather forecast refers
to the next 12/24 hours.
For example: If the barometer detects a high pressure, the display
will show the symbol of the Sun, but externally it might rain.
See table on first page.
Note:
The weather forecast symbols may not reflect the current conditions of the
time. They refer only to future conditions.
The weather forecast may not be 100% secure due to various factors.
The manufacturer is not liable for any damages or situations caused by a
wrong weather forecast.
TEMPERATURE AND HUMIDITY
Temperature and humidity values update automatically every 60
seconds.
1. Press the DOWN / C/F key (9) to select the unit of measurement
of temperature in °C or °F.
2. Press once the MAX/MIN key (10) to display the maximum
value detected of temperature and humidity.
3. Press twice the MAX/MIN key (10) to display the minimum
value detected of temperature and humidity.
4. Press three times the MAX/MIN key (10) to display the current
value detected of temperature and humidity.

TECHNICAL DATA

Weather station: ........... from 0°C to +50°C
Indoor humidity: ............ from 20% to 99% RH (relative humidity)
............................... +/- 5%
Unit: .............................. temperature 0,1°C / humidity 1%
Watch: .......................... Quartz
Power Supply: .............. 2xAAA
ME 3103
(1).
3