Turning Power On And Off - Alpine CRA-1656SP Manual De Operación

1
1
1
1
POWER
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
POWER
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
10
All manuals and user guides at all-guides.com
Initial System Setup
Immediately after installing or applying power to
the unit, it should be initialized. Using a sharp
pencil or other pointed object, press the Reset
button.

Turning Power On and Off

1
Press the POWER button to turn on the unit.
The unit displays the Changer mode.
PWR
Note: The Remote Display Unit can be turned
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
Press the POWER button for at least 3 seconds
to turn off the unit.
PWR
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
Notes:
• Once you are sure all connections are
• "FREQ." on the upper side of the PWR
Basic Operation
CD Operation
on by pressing any button.
proper, you may turn the unit on.
button of the remote control unit is not used
to set the modulator frequency.
English English