Multi-Changer Selection - Alpine CRA-1656SP Manual De Operación

2
1
PLAY
PAUSE
2
DISC SEL .
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
32
All manuals and user guides at all-guides.com

Multi-Changer Selection

You can connect and operate 2 or more (6
maximum) Alpine CD Shuttles through Ai-NET.
These Shuttles must be connected to the CRA-
2
1
1656SP using the Multi-Changer Switching
device (KCA-400C). If you use 1 Switching
device, you can connect up to 4 CD player/
Shuttles. If you use 2 Switching devices, you
can connect up to 6 CD player/Shuttles.
Press and hold the PLAY/PAUSE button for at
(Remote Control Unit/
least 3 seconds to activate the Multi-Changer
Unité de télécommande/
Unidad de control remoto)
mode.
Press the 8 or 9 button until the desired player/
changer indicator appears on the display.
Note: If the selected CD Shuttle is not
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
CD Operation
connected, the display will show "NO
CHGRX".
English