Velleman KNS2 Manual De Usario página 3

Mount the left (W30/32/34) and right (W31/33/35) legs to the sides of board W27 as in the figure.
Attach boards W36 and W37 to the bottom of board W37 by
means of mounting plates P26 and screws P19.
Attach the battery holder (P17) to the bottom of board W27.
Fig.8
KNS2
Fig.5
Fig.7
- 3 -
Fig.6
Mount boards W36 and W37 to board
W27 and attach boards W36 & W37 by
means of fixation board W38 and 2
screws P20.
Connect the wiring according to this
diagram. Insert one wire in the PVC
tube (P25), twist the two wires and
cover the joint with the PVC tube.
Make sure the wiring is correct !!!
1. green
2. red
3. yellow
4. red
5 black
VELLEMAN