JENN-AIR RANGE HOOD JXT5830 Guía De Uso, Cuidado E Instalación página 10

DUCTLESS CONVERSION
Ductless conversion is intended for applications where an exhaust duct work is not possible to be
installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood.
Fumes and exhaust from cooking is drawn and filtered by a set of optional Carbon Filters. The air
is then purified and re-circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing
new duct work, if possible. The hood is most effective and efficient as an Exhaust unit. Only when
the exhaust option is not possible should you recourse to converting the hood into a "purifying"unit.
When converted to be a "purifying" unit, a set of Carbon Filters is required on top of the standard
Metal Filter set. Order according to Part numbers below. The standard Metal Filters are intended
to capture residue from cooking and the optional Carbon Filters help to purify fumes exhausted
from cooking for re-circulation.
Carbon Filters (Required)
1. Purchase ductless Charcoal Filters as follows:
Hood Model: Part No.
JXT5830 JFLTRC5830
JXT5836 JFLTRC5836
2. Remove metal filters on hood.
3. Install attachment bracket into metal filter.
4. Clip carbon filter onto bracket.
5. Re-install metal filters.
6. Carbon Filters must be replaced after
every 120 hours of use (or approximately
every 2 to 3 months based on the average
of 1-2 hrs. of daily cooking time).
The microprocessor in the controls when
set, will count usage time and indicate
when carbon filter replacement is required.
Carbon Filter Dimensions:
9" x 6.4"
228 mm X 162 mm
Note: see User Guide for more information on
ductless conversion options.
INSTALLATION
Filters in pkg.
2
3
8