Publicidad
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL. REMOTE CONTROL COMMANDS SATHUNTER
*TPO
Provides / changes the test point.
COMMAND:
COMMAND:
RESPONSE:
*TPS
Provides the name of the current test point.
COMMAND:
RESPONSE:
*TPN
Provides the first and last valid test point.
COMMAND:
RESPONSE:
*CRA
Provides / configures the code rate of the current test point. The configured value is
not stored in the E2P, therefore when changing the test point, the configuration
changes.
COMMAND:
COMMAND:
RESPONSE:
06/2008
*TPOxx<CR>
where xx is the index of the new test point. (in hexadecimal
notation)
*?TPO<CR>
*TPOxx<CR>
where xx is the index of the current test point. (in hexadecimal
notation)
*?TPS<CR>
*TPSs...s<CR>
where s...s is the name of the current test point.
*?TPN<CR>
*TPNxxyy<CR>
where xx is the first valid index in hexadecimal notation.
where yy is the last valid index in hexadecimal notation.
*CRAxx <CR>
where xx is the code of the new code rate:
00 -> 1/2
01 -> 2/3
02 -> 3/4
03 -> 4/5
04 -> 5/6
05 -> 6/7
06 -> 7/8
07 -> 1/4
08 -> 1/3
09 -> 2/5
0A -> 3/5
0B -> 8/9
0C -> 9/10
*?CRA<CR>
*CRAxx<CR>
where xx is the code rate indicated before.
Page 9
Publicidad
