Promax SATHUNTER Manual Del Usuario página 29

USER'S MANUAL. REMOTE CONTROL COMMANDS SATHUNTER
*CON
Provides / configures the constellation of the current test point. The configurated
value is not stored in the E2P, therefore when changing, the configuration changes.
COMMAND:
COMMAND:
RESPONSE:
*SLN
Provides the number of services captured at the current test point.
COMMAND:
RESPONSE:
*SLS
Provides the service's name of the provided index (the first service is 00, and the last
one is the number indicated by *SLN less 1)
COMMAND:
RESPONSE:
*NET
Provides the network name of the current test point.
COMMAND:
RESPONSE:
06/2008
*CONx<CR>
where x is the code of the new constellation:
0 -> QPSK
1 -> 8PSK
*?CON<CR>
*CONx<CR>
where x is the code of the current test point.
*?SLN<CR>
*SLNxx<CR>
Provides the number of services captured at the current test
point.
*?SLSxx<CR>
where xx is the number of the service that you are asking for its
name.
*SLSs...s<CR>
where s...s is the name of the service with the indicated index.
*?NET<CR>
*NETs...s<CR>
where s...s is the network's name of the current test point.
Page 11