Publicidad
Idiomas disponibles
Idiomas disponibles
*SRA
Provides / configures the symbol rate of the current test point. The configured value is
not stored in the E2P, therefore when changing the test point, configuration changes.
COMMAND:
COMMAND:
RESPONSE:
*STN
Provides / configures the standard of the current test point. The configurated value is
not stored in the E2P, therefore when changing the test point, the configuration
changes.
COMMAND:
COMMAND:
RESPONSE:
*LOC
Indicates whether the demodulator is locked.
COMMAND:
RESPONSE:
Page 10
USER'S MANUAL. REMOTE CONTROL COMMANDS SATHUNTER
*SRAxxxxx <CR>
where xx is the code of the new symbol rate (in decimal
notation)
*?SRA<CR>
*SRAxxxxx<CR>
where xxxxx is the symbol rate of the current test point.
*STNx<CR>
where x is the code of the new standard:
0 -> DVB-S
1 -> DVB-S2
*?STN<CR>
*STNx<CR>
where x is the standard code of the current test point.
*?LOC<CR>
*LOCx<CR>
where x is:
F -> NO LOCKED
0 -> DVB-S
1 -> DVB-S2
06/2008
Publicidad
