Making The Electrical Connections - ETI Solid State Lighting ST-2-9-840-SV-N Guía De Uso Y Cuidado

surface Mounting (continued)
7

Making the electrical connections

□ Insert the hot and neutral (black and white) wires from the electrical box into the wire connectors of the same color wires
from the fixture body (B).
□ Insert the ground wire from the electrical box into the wire connector attached to the green wire from the fixture body (B).
□ Reconnect the terminal and ground wires with the attached wire connectors.
8
Attaching the lens cover to the fixture body
□ Snap the lens cover (A) onto the fixture body (B).
□ Restore the power to the electrical box.
□ Turn on the light switch to activate the fixture.
B
A
Wire Connector
8
Wire Connector
B
A