Note – Day of the week
For the weekday display, you can choose amongst the following languages: German (GER), English
(ENG), Italian (ITA), French (FRE), Dutch (DUT), Spanish (SPA) and Danish (DAN).
5.3 Alarm settings and display
• Press and hold the alarm on/off button (6) for approx. 3 seconds to open the alarm settings. The
hours display begins to flash.
• Press the p button (2) or the q button (3) to select the hours for the alarm time, and confirm your
selection by pressing the alarm on/off button (6). The minutes display begins to flash.
• Repeat the process to set the minutes for the alarm time. Once you have confirmed your minutes
selection with the alarm on/off button (6), the alarm is set and
• If the alarm is triggered, the alarm symbol will begin to flash and an alarm will sound.
• Press the alarm on/off button (6) to stop the alarm. Otherwise, it will stop automatically after 2
minutes.
• If you press the snooze/light button (1) during the alarm, the alarm is interrupted for 5 minutes
and then goes off again. The alarm symbol flashes. Press any button to disable the snooze function.
The same goes for the alarm signal. The alarm repeats every 24 hours.
5.4 Temperature indicator
Press the q button (3) to switch between °C and °F for the temperature display.
5.5 Backlight
Press the snooze/light button (1) to light up the display for approx. 5 seconds.
6. Care and Maintenance
Only clean this product with a slightly moist, lint-free cloth, and do not use aggressive cleaning agents.
Make sure that water does not get into the product.
6
shows in the display.