Amibot PRIME 2 Manual Del Usuario página 20

EN
Operating the appliance
RANDOM Mode (mode 2)
This mode is recommended for rooms that have a lot of furniture
and objects on the floor and carpets.
WALL Mode (mode 3)
ZIG-ZAG Mode (mode 4)
The RANDOM Mode can be activated using
the remote control or by pressing the button
on the top of the robot. The indicator light
turns steady blue. The robot makes random
movements automatically going around the
obstacles it finds during its cleaning cycle.
With the WALL Mode, the robot goes along
the walls and cleans the skirting boards.
Thanks to this cleaning mode and its 2 side
brushes, the robot gets into the tightest
places and collects dust and debris from
around furniture and chair legs, along walls
and skirting boards, etc.
With the ZIG-ZAG mode, the robot takes a
rectangular route designed to thoroughly
clean the entire surface of a clear room. The
robot is going to operate until the battery is
depleted then return to its home base.
18