Pausing The Robot; Stopping The Robot; Switching Off The Robot - Amibot PRIME 2 Manual Del Usuario

EN
Operating the appliance

Pausing the robot

To pause the robot, press the AUTO button on the robot or ON/OFF
on the remote control.
NOTE: The robot automatically switches to standby after around 10 minutes. It can
be switched back on at any time by pressing the AUTO or ON/OFF buttons. Press
the button a second time to reactivate its cycle.

Stopping the robot

When the robot finishes its cleaning cycle, it goes back to home base.
To manually stop the robot, press the AUTO button on the robot or
ON/OFF on the remote control.

Switching off the robot

Turn the ON/OFF power button to "O". The robot is switched off.
20