Important - Marshalltown PL11 Manual Del Usuario

5. Press the winch assembly slightly back toward the frame
(Figure 6). This automatically engages the slide bar lock to
keep the winch fully extended.
IMPORTANT: Before continuing, be sure that the slide bar lock
is fully engaged- that is, rotated clockwise as far as possible.
WARNING
6. Attach the cradle to the frame:
• Insert the cradle's post into the opening on top of the frame
(Figure 7).
• Secure the cradle to the frame by snapping the tilt latch
upward so it hooks over the stud on the cradle.
7. Attach the crossarms to the cradle:
NOTE: The crossarms are interchangeable.
• Slide the tapered plates on the crossarms into the tapered
sockets on the cradle.
• Press each crossarm forward into the socket until the spring tab
on the bottom of the crossarm snaps into place (Figure 8).
WS2091
ASSEMBLY (CONTINUED)
To avoid injury, slide bar lock must be fully
engaged when winch assembly is extended.
Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 • www.MARSHALLTOWN.com
Figure 6
Figure 7
Figure 8
5 of 12