Assembly And Preoperation - Campbell Hausfeld CP5101 Instrucciones De Funcionamiento Y Manual De Piezas

Operating Instructions and Parts Manual

assembly and Preoperation

aSSEMbly anD PREoPERatIon
1. Slide the handle assembly over the lower legs of the cart
base. Use the (supplied) star knob and bolts to secure the
handle to the legs (See Figure 4).
2. Insert spray nozzles into rubber nozzle holder (See Figure
5).
3. Secure garden hose (not included) to the inlet connection
on pump (See Figure 6).
4. Connect the high pressure hose to the pump outlet (See
Figure 7).
5. Connect the high pressure hose to the gun (See Figure 8).
6. Attach the lance to the gun (See Figure 9).
7. Install quick connect nozzle (See Figure 10).
Figure 4 - assemble handle
Figure 5 - Insert spray nozzles into the holder
Thermal Relief Valve
Figure 6 - Pump hook up
6
Pump
Outlet
Detergent
Hose Barb
Pump
Inlet
www.campbellhausfeld.com
Figure 7 - connect high pressure hose to pump
Figure 8 - attach high pressure hose to gun
Figure 9 - attach lance to gun
o
Figure 10 - Quick connect nozzle
f
h
f