Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9
Install the lower door frame mounts onto the
side body channel as shown using 5/16" torx
screws.
See Figure 12
Now insert the door frame assembly into the
mounts at the windshield header and at the
vertical retainer mount.
See Figure 13
Figure 13
Fabric Installation
10
Lay the new main skin over the hardware. See Figure 14
Attach the corresponding snaps to the middle and rear bows. See Figure 15
Figure 14
NOTE: Actual application may vary slightly from illustrations.
Page 5 of 9
Figure 12
Door Frame Bracket
Vertical
Vertical Retainer
Outside of Vehicle
Figure 15
Roll
Bar
Front 5/16" Torx bolt for
side rail
Rod
Mount
Publicidad
Tabla de contenido
