Belkin ExpressCard FireWire 800 Manual Del Usuario página 10

Troubleshooting
The ExpressCard Adapter and devices connected to the
computer do not work properly.
Please do the following:
1. Check that all the cables you are using are the correct
types, and that they are all securely connected.
2. Make sure all devices are powered on and connected to
the proper power supply and source.
3. Reconnect daisy-chained devices you may have
disconnected for installation. If reconnecting does not
clear up the problem, restart your computer.
4. Make sure you have properly installed
the ExpressCard Adapter.
The computer did not detect the
ExpressCard Adapter.
1. Make sure that the ExpressCard Adapter is correctly
plugged into the ExpressCard 34/54mm slot; if not, plug
in it securely.
2. If the ExpressCard Adapter is plugged in correctly, see if
its gold connectors are clean; if not, clean the connector
surface.
3. Follow the procedure on page 6 titled "Verifying Proper
Installation". If the ExpressCard designation "OHCI IEEE
1394b Host Controller" does not appear in the Device
Manager, update your computer BIOS to the latest
version (contact your computer manufacturer for details).
If after updating your BIOS your computer still does not
detect the ExpressCard Adapter, contact your computer
manufacturer for advanced support for BIOS.
7 7
1
2
3
4
5