Descargar Imprimir esta página

Fontanot Genius-T Serie Instrucciones Para El Ensamblaje página 58

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
EN
productidentificationdata
trade name: GENIUS 030A T
type: spiral staircase
STRUCTURE
description
composed of metal or wooden spacers (1) and plastic spacers (2) and washers (3)
stacked and compressed on the central pole (4)
materials
spacers: Fe 370 / beech / ash / oak
washers and spacers: polycarbonate
pole: galvanised Fe 370
finish
metal spacers: epoxy powder coated in furnace
wooden spacers: water-based colouring and UV painting
TREADS
description
circular or fanned out wooden treads (5) stacked on the central pole (4)
materials
beech / ash / oak
finish
water-based colouring and UV painting
RAILINGS
description
composed of vertical metal balusters (7) fastened to the treads (5) and a wooden
handrail (6)
materials
balusters (7): Fe 370
handrail (6): beech / ash / oak
fixings (8)(9): aluminium / zamak
finish
balusters (7) and fixings (8)(9): epoxy powder coated in furnace
wooden handrail (6): water-based colouring and UV painting
OBLIGATORY CLEANING AND MAINTENANCE
Clean the treads as soon as dirt spots and dust deposits appear and at least every 6 months using a soft cloth
moistened with water and specific non-abrasive and non-aggressive detergents. NEVER use abrasive scourers.
After cleaning, thoroughly dry the surfaces with a microfibre cloth to remove the haloes that form because of the
limestone in the water.
Approximately 12 months from the date of installation, check tightness of the screws of the various components.
Should even the smallest malfunction occur, it is obligatory to immediately and professionally carry out extraordinary
maintenance.
USE PRECAUTION
Avoid any improper use that is not in accordance with the product. Possible violations or installations which don't
comply with the providers instructions can invalidate the agreed product conformities.
58 - Genius 030A T

Publicidad

loading