Mopar ADDENDUM K6861439 Manual Del Usuario página 15

14
13. Using Trim Stick C­4755 remove the center bezel (1)
from the instrument panel by releasing the snap re­
tainers from the instrument panel.
14. Disconnect the clock harness connector.
15. Disconnect the harness connectors (2 & 3) from the
rear of the Integrated Center Stack (ICS) screen mod­
ule (1) to allow better access to the 40 ­ way connector.
16. Disconnect the 40­Way connector from the instrument
cluster bezel.
17. Remove the instrument cluster bezel from the vehicle.
NOTE: Take the proper precautions to protect the face
of center bezel from cosmetic damage while perform­
ing this procedure.
NOTE: If the foam seal on an air outlet is deformed or
damaged, the seal must be replaced.
18. Place the instrument panel bezel on a flat bench and
perform the following step on both air outlets.
19. Using Trim Stick C­4755 disengage the six retaining
tabs (3 and 4) that secure each air outlet (1) to the
center bezel and remove the outlets.
Jan 02, 2012 K6861439