Mopar ADDENDUM K6861439 Manual Del Usuario página 18

34. Position the switch­bank assembly (2) near the
installed location.
35. Connect the electrical connector (2) to the back of the
switch­bank assembly (1).
NOTE: If equipped with a SD slot rubber plug, it must
be removed before installing switch bank panel.
36. Position the switch­bank panel (1) in the instrument
panel and press firmly to engage the clips, securing
the switch­bank to the instrument panel.
37. Connect the negative battery cable.
38. Refer to Technical Service Bulletin (TSB) 08­051­11, which is titled Radio Anti­Theft Codes.
39. Follow the TSB to input the radio code required to activate the radio.
Jan 02, 2012
17
K6861439