Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push thirty-eight HIDDEN CAMS (1F) into the
å
STRETCHERS (B, C, and D) and SHELF
SLATS (G and H). Then, insert the metal end of
a CAM DOWEL (2F) into each HIDDEN CAM except
in the short edges of the STRETCHERS (B, C, and D).
2F
Do not insert CAM
DOWELS into the
short edges of
these parts.
B
Do not insert
CAM DOWELS
into these parts.
D
www.sauder.com/services
Arrow
1F
(38 used)
(22 used)
B
B
B
C
C
D
Do not tighten the HIDDEN CAMS in this step.
G
H
H
Arrow
1F
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
416136
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
G
G
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Hole
Arrow
Page 5
Publicidad
