Publicidad
Step 4
First, fi ll the holes in the ends of the SHELF SLATS (G) 1/4 to 1/2
å
full with GLUE (54M). Then, insert six WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
Now, place a drop of GLUE (54M) on the ends of the WOOD
å
DOWELS (15F) in the ends of the SHELF SLATS.
Fasten the FRONT BOTTOM STRETCHERS (C) to the SHELF
å
SLATS (G and H). Tighten ten HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the SHELF SLATS insert
å
into the STRETCHERS. Wipe away any excess GLUE.
Edge without holes
D E N
H I D
i t h
e w
f a c
S u r
C
15F
Edge with
CAM DOWELS
54M
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Page 8
M S
C A
H
(6 used)
Start
Arrow
H
G
G
G
f a c
S u r
15F
Tighten
Maximum
210 degrees
Minimum
190 degrees
416136
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Edge with
CAM DOWELS
Edge without holes
M S
C A
E N
I D D
u t H
i t h o
e w
Arrow
www.sauder.com/services
C
Publicidad
