Introduction; Ce Mark; Explanation Of Symbols; Safety Instructions - MACHEREY-NAGEL NANOCOLOR TIC-Ex Manual De Usario

1. Introduction

The NANOCOLOR
TOC tube tests. For evaluation of the total organic carbon (TOC) prior to determination the
inorganic carbon needs to be removed from the sample. The removal is accomplished by
purging of air with help of NANOCOLOR

2. CE mark

The CE mark declares that the product complies with the harmonization legislation of the
European Community listed below:
• European Directive 2011/65/EU on the restriction of the use of certain hazardous sub‑
stances in electrical and electronic equipment (RoHS 2)
• European Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)
• European Directive 2014/30/EU on the harmonization of the laws of the member states
relating to electromagnetic compatibility (EMC)
• European Directive 2014/35/EU on the harmonization of the laws of the member states
relating to the making available on the market of electrical equipment designed for use
within certain voltage limits (NSR)

3. Explanation of symbols

Description of the used symbols:
!
Caution: Follow the instructions in this section carefully to ensure the device does
not become damaged.
!
Warning: The instructions in this section must be followed carefully to ensure that no
further dangers or hazards exist, otherwise the device will very likely become dam‑
aged.

4. Safety instructions

!
Caution: The NANOCOLOR
facturer and only be correspondingly qualified personnel. Note all markings and
signs mounted on the device or stated in the operating manual. Ignoring them can
lead to personal injuries and/or damage to the device.
10
®
TIC‑Ex is required during the sample preparation of MACHEREY‑NAGEL
NANOCOLOR
®
TIC‑Ex through the prepared sample solution.
®
TIC‑Ex may only be used as specified by the manu‑
®
TIC-Ex V 2.0 / 11.17