Hauck Candy Instrucciones página 8

Ensure the left & right position locks are always fixed in the same level. The back rest can be
GB
altered to 4 different seat positions.
7. ADJUSTING THE LEG REST (fig. 7)
Press both (left & right) levers to bring the leg rest to the desired position.
8. CANOPY ASSEMBLY (fig. 8)
Attach the clamping device of the canopy to both sides of the stroller frame.
9. FOLDING AWAY (fig. 9a, 9b):
Return the backrest to the sitting position.
a. Pull up the handle grip at the back of the seat to release the base lock;
b. press down the upper safety lock by your foot and push the handle forward to close the
stroller;
Secure the stroller with the transport lock
10 SECURE THE CHILD IN THE SEAT BY 5-POINT SAFETY BELT (fig 10):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt
(the one that comes between the child's legs). Adjust the length of the belt to your child's needs.
Always ensure the straps are not twisted or caught on the stroller frame. Check the adjustment
every time you place the child in the seat and when the backrest is reclined. To release the
harness, squeeze & open the buckle.
Harness adjustment: Insert both fasteners (B) into the buckle (A), ensure that both buttons click
into position. Ensure both shoulder straps (C) are attached to the fasteners (B). Each strap has
its own length adjuster (D). To undo the harness, press the buttons and pull apart. "D" Rings
are provided for fitment of a full safety harness. The attachment points (D-rings) are located
on side straps.
WARNING: (A child's safety is your responsibility.) The child should be harnessed in at all times
and should never be left unattended. The child should be clear of moving parts while making
adjustments. This stroller requires regular maintenance by the user.
Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use as
instructed. Never use the harness without the shoulder straps.
UPKEEP AND MAINTENANCE
IN GENERAL
Please check the stroller functions on a regular basis. Make sure that the frame is stable, the
screws are tight, the latching devices are safely locked, the wheels are securely attached and the
brakes are in working order. Check the cover occasionally, making sure that the stitching is still firm,
and inspect the quality of the plastic parts. Any broken or worn working parts should be replaced
immediately. Proceed in the same manner with components that are broken, torn, defect or worn-
out. Please use only original hauck replacement parts. Do not subject your stroller to excessive
sunshine. This can lead to a fading of textile covers and plastic parts.
CLEANING THE COVERS
Remove the covers from the frame by loosening the loops, press studs or screws. Please read the
instructions on the sewn-in label before cleaning.
To clean the cover gently, wipe it down evenly using only a damp cloth. As long as there are no
plastic, wood or metal parts on or in the cover, it can be machine-washed at 86°F (30°C) and
medium speed. The cover should be air-dried, but not exposed to excessive sunshine. Please do
not dry the cover in the drier, to avoid shrinking. Do not re-fit the covers until they are completely
dried.
CLEANING THE FRAME
Dry the stroller with a soft cloth after cleaning or after use rain or snow. Use only mild soapy water or
lukewarm water to clean the frame of your stroller. Plastic parts can be cleaned with mild detergent
cleaners.
WHEEL MAINTENANCE
Clean and service the wheels regularly. Apply corrosion or lubricant spray on the rim when
necessary, to protect against rust and deposits. Please make sure in winter that road salt residue
is removed immediately by using warm water and damp cloth. Remove dirt from the wheels and
axles on a regular basis.
8