Adjusting The Cutting Height; During Operation; Starting The Machine - Toro Recycler 20367 Manual De Instrucciones

Adjusting the Cutting Height

Adjust the cutting height as desired. Set all wheels to the same cutting height

During Operation

Starting the Machine

1. Ensure that the battery pack is charged and installed in the machine; refer to
(page 10).
2. Insert the electric-start button into the electric starter switch (A of
3. Squeeze the blade-control bar and hold it to the handle (B of
4. Press the electric-start button and keep it pressed until the motor starts (C of
Figure 8
Figure
Figure
Figure 9
11
(Figure 8).
Installing the Battery Pack
9).
9).
Figure 9).
g304633
g296941