Klarstein Norderney Manual De Usario página 21

Child lock function
1. To set the heater to a standby mode and apply the child lock function, simply hold the OK key and wait for
5 seconds. You will see the padlock image lock on the LCD screen.
2. To unlock, press the OK key for 5 seconds.
Setting time
To set the time press the TIME key, when the hour digits "12" starts to blink, use up and down keys to set the
hour and confirm by pressing TIME key. Now minute digits "00" to blink, use up and down keys to set the
minute and confirm the minute by pressing TIME key again.
Open window function
1. The heater is fitted with state of the art energy saving technology such as the open window function.
2. To activate this function, press and hold the TEMP button for 5 seconds. The window icon appears on the
LCD screen.
3. When the open window icon appears, the heater will stop heating and window icon flashes, as long as the
room temperature drops by 4 °C in 20 minutes. If want to heating and the open window function does not
flash, please press and hold the TEMP button for 5 seconds.
4. To deactivate the function, press and hold the TEMP key for 5 seconds again,then the window icon will
disappear.
21