Audio Connections; Basic Operation - Philips HC 8800 Manual Del Usuario

XP SBC HC 8800/00-1.1

Audio Connections

Connecting the FM transmitter to a
headphone output of an audio
source (figure 5)
1 Connect the 3.5mm stereo plug of the
stereo audio cable to the headphone
output of an audio source, such as TV, HiFi
or PC.
– In case your audio source has a 6.3mm
headphone output, use the supplied
3.5mm to 6.3 mm stereo adapter plug.
2 Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
3 Switch on the headphone.You may hear a
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
4 To tune, press and hold the tuning control
button for about 1 second. Repeat if
necessary.
5 Adjust the volume to the desired level with
the headphone volume control.
8
03-08-2001 16:45
1 Switch on your audio source and carefully
2 Switch on the headphone.You may hear a
3 To tune, press and hold the tuning control
4 Adjust the volume to the desired level with
Pagina 8

Basic operation

Basic operation
When the FM transmitter is connected to a
headphone output of an audio source.
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
button for about 1 second. Repeat if
necessary.
the headphone volume control.