Basic Operation; Charge The Battery; Volume Control - Monster ROC Sport SUPERSLIM Manual Y Garantía

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47

Basic operation

Charge the Battery

Your ROC SuperSlim initially has enough power to
complete the pairing and a few calls. When battery
is low, you will hear warning tone and indicator
light changes to red. The headphone includes a
Micro USB cable that can be connected to your
computer or other device made for USB charging.
Plug the Micro USB end of the included USB cable
into the USB micro port charger connector on the
right channel side of the headphone. Plug the
other end into a USB port on your computer or
other devices made for USB charging. The indicator
light will be blue while charging. Once fully
charged, the indicator light will be off. Charge time
is approximately 1.5 hours on an empty battery.
Note: The lifetime of the battery will be significantly
reduced if your headphone is left uncharged for a
long period. We recommend that you recharge your
headphone at least once a month.
Power On/ Power Off
Press the Multifunction button for about 1 second
to power on the headphone. To power off the
headphone, press the Multifunction button for
about 3 seconds.

Volume Control

Press the Volume "+" or "-" to turn volume up
or down, you hear beep once you reach the
maximum volume or minimum volume.
Pairing
Pair One Phone
1.
Press and hold the Multifunction button for
about 5 seconds until indicator light flashes
blue and red alternately, you hear "Power
on" and "Pairing". Now headphone is in
pairing mode.
2.
Activate Bluetooth® on your phone and set it
to search for new devices.
3.
Select "SuperSlim". If your phone asks, enter
0000 (four zeros) for the passcode or accept
the connection. The indicator light stops
flashing red and blue once successfully
paired, you hear "Paired, phone 1 connected".
Some phone list an option to "Play through
earphone", select to use the headphone.
Note: When you unbox the headphone and power
it on for the first time, it will enter to pairing mode
automatically.

Publicidad

Tabla de contenido
loading

Tabla de contenido