Basic Operation - Monster iSport VICTORY Manual De Instrucciones

Basic operation

Charge the Battery
Your Isport Victory ™ Wireless initially has enough
power to complete the pairing and a few calls.
When battery is low, you will hear warning tone
and indicator light changes to red. The headphone
includes a Micro USB cable that can be connected
to your computer or other device made for USB
charging. Plug the Micro USB end of the included
USB cable into the USB micro port on the control
talk box. Plug the other end into a USB port on
your computer or other devices made for USB
charging. The indicator light will be blue while
charging. Once fully charged, the indicator light
will be off. Charge time is approximately 1.5 hours
on an empty battery.
Note: The lifetime of the battery will be significantly
reduced if your headphone is left uncharged for a
long period. We recommend that you recharge your
headphone at least once a month.
Power On/ Power Off
Press the Multifunction button for about 1 second
to power on the headphone. To power off the
headphone, press the Multifunction button for
about 3 seconds.
Volume Control
Press the Volume "+" or "-" to turn volume up
or down, you hear beep once you reach the
maximum volume or minimum volume.
Pairing
Pair One Phone
1. Press and hold the Multifunction button for
about 5 seconds until indicator light flashes
blue and red alternately, you hear "Power
on" and "Pairing". Now headphone is in
pairing mode.
2. Activate Bluetooth® on your phone and set it
to search for new devices.
3. Select your Monster device. If your phone
asks, enter 0000 (four zeros) for the passcode
or accept the connection. The indicator light
stops flashing red and blue once successfully
paired, you hear "Paired, phone 1 connected".
Some phone list an option to "Play through
earphone", select to use the headphone.
Note: When you unbox the headphone and power
it on for the first time, it will enter to pairing mode
automatically.
Pair Another Phone
Multipoint technology enables you to pair another
phone and take a call from either.
To pair with another mobile phone, power off
the headphone, then follow the steps for "Pair
one phone". After pairing successfully, restart the
headphone to connect to 2 paired mobile phone
automatically and manually.
Note: You may need to connect the second
phone manually.
Call
Answer a Call: Press the Multifunction button once.
Reject a Call: Press and hold the Multifunction
button for about 1 second.
End a Call: Press the Multifunction button once.
Redial the Last Call: Press Volume"+" and "-" for
about 3 seconds in standby mode. The mobile
phone will redial the last call number. "+" for 1 second once to skip track forward.
Mute On/Off: Press the Volume "-" for about
3 seconds to mute on/off.
Switch Between the Headphone and Phone:
Press the Multifunction button for about 1 second
during a call, the call will be switched to the mobile
phone, redo this operation again, the call will be
switched to the headphone.
End Current Call and Answer New Call: When a
new call rings during a call, press the Multifunction
button once to answer new call and end current
call simultaneously.
On Hold Current Call and Answer New Call:
When a new call rings during a call, double press
the Multifunction button to hold current call and
answer new call. To switch between held call and
active call, double press the Multifunction button.
Activate Voice Dialing: Double press the
Multifunction button to trigger the voice dialer,
this function varies with user's smartphone.
Music
Play / Pause Music: Press Multifunction button
once to play / pause music. (Some phones may
require you to start a media player first).
Track Back / Forward: Press the Volume "-" for
1 second once to skip track backward, press Volume
Switch Music and Call: When a call rings during a
music playing, the music automatically pauses to
allow you to answer or ignore the call. Once the call
is ignored or ends, the music is resumed.