Setting The Temperature Control - Climadiff AVINTAGE AV24XI Manual De Utilización

SETTING THE TEMPERATURE CONTROL

You can set the temperature as required by pressing the « UP » or « DOWN » button. When you press the two buttons
for the fist time, the LED readout will show the original temperature set previously (the temperature preset at the factory
is 12°C/54°F).
The temperature will increase 1°C/1°F if you press the button « UP » once. The temperature will decrease 1°C/1°F if
you press the button « DOWN » once.
To view the « set » temperature at any time, press the « UP » or « DOWN » button, the "set" temperature will
temporarily "flash" in the LED display for 5 seconds.
The internal storage temperature will appear in blue color in the temperature display window.
MODEL 2 ZONES
POWER
To control this appliance turn on/off. To turn OFF the appliance, touch the
5 seconds.
SET
To set or view the internal temperature setting for each zone.
LIGHT
To control the inner light turn on/off.
UP
Used to raise (warm) the set temperature by 1°C or 1ºF.
DOWN
Used to lower (cool) the set temperature by 1°C or 1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahrenheit to
Celsius or from Celsius to Fahrenheit, touch and hold button the
SETTING THE TEMPERATURE CONTROL
The wine cooler has two temperature zones. The temperature settings of LOWER ZONE and UPPER ZONE are adjustable
with the range 5º-22ºC/40º-72ºF. It is recommended to set the LOWER ZONE to 13-22ºC / 55-72ºF which is ideal for storing
white and red wines and the UPPER ZONE to 5-13ºC / 40-55ºF which is ideal for storing sparkling and white wines.
c
F
and marks at the same time for
for 5 seconds.
31