3. Close the cover of the memory card slot. Ensure that the cover
is properly closed.
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
3. When the device indicates a full charge, disconnect the charger from the device, then
from the wall outlet.
You do not need to charge the battery for a specific length of time, and you can use the
device while it is charging. If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display or before any calls can be
made.
Tip: Disconnect the charger from the wall outlet when the charger is not in use.
A charger that is connected to the outlet consumes power even when it is not
connected to the device.
Keys and parts
Note: The surface of this device does not contain nickel in the platings. The
surface of this device contains stainless steel.
© 2009 Nokia. All rights reserved.
15