Cleaning And Servicing - Hilti DX450 Manual De Instrucciones

Cleaning and servicing

1
Inside housing
5
Piston
9
Inside of baseplate
Printed: 24.03.2014 | Doc-Nr: PUB / 5069832 / 000 / 03
The surfaces should be cleaned with the supplied brushes.
2
Inside of cartridge chamber
6
Outside of fastener guide
Before reassembling, lubricate all parts spar-
ingly with Hilti spray.
The tool should be cleaned once a week or
after a large number of fasteners have been
driven (approx. 2500 fasteners).
3
Inside of piston guide
7
Inside of fastener guide
CAUTION while cleaning the tool:
● Never use grease for maintenance / lubrication of tool parts. This may strongly affect the
functionality of the tool. Use only Hilti spray or such of equivalent quality.
● Dirt from DX tool contains substances that could be endangering your health.
– Do not breath in the dust from cleaning
– Keep dust away from food
– Wash your hands after cleaning the tool
4
Outside of piston guide
8
Outside of baseplate
17