Sauder L-Shaped Desk Manual Del Usuario página 28

Step 23
Fasten the EXTENSION BLOCK (X) to the RIGHT UPRIGHT (C). Use two SILVER
å
1-1/8"FLAT HEAD SCREWS (10S) through the larger holes in the EXTENSION BLOCK.
Fasten the DRAWER UPRIGHT (W) to the CONNECTOR PLATE on the
å
LARGE TOP (E). Tighten two HIDDEN CAMS.
NOTE: Use the two large holes closest to the RIGHT UPRIGHT (C) in the
å
CONNECTOR PLATE.
Then, fasten the DRAWER UPRIGHT (W) to the MODESTY PANEL (H). Use a
å
METAL BRACKET (4G) and two BLACK 9/16" LARGE HEAD SCREWS (1S).
Now, fasten a CABINET RIGHT (35GA) to the EXTENSION BLOCK (X)
å
and a CABINET LEFT (35GB) to the DRAWER UPRIGHT (W). Use four
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
The remaining steps will show the pencil drawer on the left side of your unit.
å
BLACK 9/16" LARGE HEAD SCREW
(2 used for the METAL BRACKET)
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
Page 28
1S
4G
Finished
edge
3S
Maximum
210 degrees
Minimum
190 degrees
H
E
W
o u t
w i t h
f a c e S
C A M
S u r
D E N 3
H I D
2
1
1
X
Roller end
Finished
edge
SILVER 1-1/8" FLAT HEAD SCREW
(2 used for the EXTENSION BLOCK)
418270
PENCIL DRAWER ON RIGHT
Arrow
C
2
10S
www.sauder.com/services