Gray 1-3/8" Machine Screw - Sauder L-Shaped Desk Manual Del Usuario

Step 27
NOTE: Follow the option you chose in the diagram below. Be sure the locator hole is positioned exactly as shown.
å
Fasten the PENCIL DRAWER FRONT (S) to the PENCIL DRAWER BOX FRONT (D467). Use two BLACK 7/8" LARGE HEAD
å
SCREWS (17S) through the exact holes shown in the PENCIL DRAWER BOX FRONT and into the PENCIL DRAWER FRONT.
Fasten the PULL (70K) to the PENCIL DRAWER FRONT (S). Use two GRAY 1-3/8" MACHINE SCREWS (39S) through the exact
å
holes shown in the PENCIL DRAWER BOX FRONT (D467), through the PENCIL DRAWER FRONT, and into the PULL.
Locator hole
should be here.
39S

GRAY 1-3/8" MACHINE SCREW

(2 used for the PULL)
PENCIL DRAWER ON RIGHT
39S
GRAY 1-3/8" MACHINE SCREW
(2 used for the PULL)
Page 32
70K
S
D467
70K
D467
PENCIL DRAWER ON LEFT
Locator hole
should be here.
S
418270
17S
BLACK 7/8" LARGE HEAD SCREW
(2 used in this step)
17S
BLACK 7/8" LARGE HEAD SCREW
(2 used in this step)
www.sauder.com/services