Sauder L-Shaped Desk Manual Del Usuario página 34

Step 29
1
D14
Q
Groove
Insert the LARGE DRAWER SIDES (D14 and D15) at
å
an angle into the slot at each end of the LARGE
DRAWER FRONT (Q).
3
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Fasten the LARGE DRAWER BACK (D78) to the LARGE DRAWER SIDES (D14 and D15). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the LARGE DRAWER BOTTOM (D716) inserts into the groove of the LARGE DRAWER BACK (D78).
å
Repeat this step for the remaining drawer using the DRAWER FRONT (R), DRAWER SIDES (D24 and D25), and
å
DRAWER BACK (D109).
Page 34
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D15
D78
D14
D716
VIEW THE T-LOCK BOX VIDEO
2
D14
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the LARGE DRAWER BOTTOM (D716) into the
å
grooves in the LARGE DRAWER SIDES (D14 and D15) and
LARGE DRAWER FRONT (Q).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D15
418270
With the palm of your
hand, tap the DRAWER
BOTTOM down into
the groove.
U n
fi n
s u i s h
r f a
e d
c e
D716
D15
Q
30S
(8 used in this step)
www.sauder.com/services